Part Number
CRW-31915
Small Block Chrysler 273, 340, 360, and 1967-up 318 LA V8, Hydraulic Flat Tappet, 1200 to 3800 RPM Range, .423 Int (1.5R), .441 Ex (1.5R) Lift, Level 2
$240.70
⚠ PROP 65 WARNING
⚠ WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer. Please contact us to obtain a list of harmful chemicals.
For more information, go to www.P65Warnings.ca.gov.
Level 2 profiles are for individuals that require more power and an extended RPM range. Works well with stock or near-stock engines and drive trains. These camshafts provide excellent low end and mid-range power for spirited street and off road driving and mild marine applications. Modifications that should accompany installation of these cams include small diameter tube headers, low restriction dual exhaust, aftermarket manifold, increased cfm carburetor and reworked or performance ignition. Increased compression (9.5:1) is recommended for maximum output. Aftermarket torque converter with slightly higher stall speed is recommended because stock factory converters do not allow the engine to provide adequate idle speed and off idle performance. Works well with four-speed manual transmission. Designed for lightly modified street engines.
Exhibits broad stump pulling power and torque. Good for stock replacement.
Exhibits broad stump pulling power and torque. Good for stock replacement.
Price | $240.70 |
---|---|
Vehicle Make | Chrysler SB |
Camshaft Type | Hydraulic Flat Tappet |
RPM Range | 1200 to 3800 |
Intake Lift | 0.423 |
Exhaust Lift | 0.441 |
Intake Duration at 50 | 200 |
Exhaust Duration at 50 | 208 |
Advertised Intake Duration | 250 |
Advertised Exhaust Duration | 254 |
Valve Setting | Hydraulic |
Lobe Separation Angle | 112 |
Custom Notices | ⚠ PROP 65 WARNING |