Search results for: '4075vyw9rpm 6 schoenfeld mopar midget tri y headers 1 7 8 2 w 9 raised port 60328'
Shop By
-
KEV-1091W PART NUMBER1091W Kevko Chevy Stock Car Sportsman Pan w/ Windage Tray Right or Left Dipstick 2 Piece$339.99Small Block Chevy, 7 quart, 8 inch Deep, Added Windage Tray, 1957-1985, Left or Right Hand Dipstick 2 Piece Rear Seal. Learn More
-
KEV-1091WNRH PART NUMBER1091WNRH Kevko Chevy Stock Car Sportsman Pan w/ Windage Tray Right Dipstick 1 Piece$339.99Small Block Chevy, 7 quart, 8 inch Deep, Added Windage Tray, 1986 and Up, Right Hand Dipstick 1 Piece Rear Seal. Learn More
-
CHP-PRO171R3 PART NUMBERSBC 57-85 Champ Pans Dry Sump Aluminum Oil Pan 6 Deep PRO171R3$734.25Fits SB Chevy 1957-1985, 6” deep right Side; 4 1/2” deep left side, Dirt circle track, No pan gasket required, kick out pouch that starts at the pan rail and goes to the bottom of the pan, 0.100” aluminum, access holes for mounting , three -12 o-ring ports that exit the top right side of the pan, inspection hole, drain plug, louvered windage tray, for use with reverse mounted starter, will clear a mechanical fuel pump Learn More
-
CHP-PRO173R3 PART NUMBERSBC 86+ Champ Pans Dry Sump Aluminum Oil Pan 6 Deep PRO173R3$734.25Fits SB Chevy 1986-Up, One piece rear main seal, 6" deep on right; 4 1/2" deep on left, Dirt circle track, No pan gasket required, will clear a mechanical fuel pump, kick out pouch that starts at the pan rail and goes to the bottom of the pan, 0.100” aluminum, access holes for mounting, three -12 o-ring ports that exit the top right side of the pan, inspection hole, drain plug, for use with reverse mounted starter Learn More
-
CHP-CP55 PART NUMBERSBC Champ Pans Wet Sump Steel Oil Pan 8 Deep CP55$197.70Fits SB Chevy 1957-1985, 8" deep x 11" wide x 9 1/2" long, Circle track, 8 quarts with filter, kick out on the right side, three trapdoors, one crank scraper, oil check level plug, clear zinc finish, use JR131 dipstick, for use with stock or mini-starter, ideal for stock front stub cars with the stock engine location Learn More
-
KEV-F800W PART NUMBER
-
CHP-PRO181R3 PART NUMBERSBC Champ Pans Dart DRC Dry Sump Aluminum Oil Pan 6 Deep PRO181R3$734.25Fits Dart DRC, Rocket Chassis, 6” deep on right side; 5” deep on left side, Dirt circle track, kick out pouch that starts at the pan rail and goes to the bottom of the pan, 0.100” aluminum, access holes for mounting the right side pan bolts, three -12 o-ring ports that exit the top right back half of the pan, one inspection hole, one drain plug, louvered windage tray, no pan gasket required, for use with reverse mounted starter, will clear a mechanical fuel pump Learn More
-
CHP-PRO1106KO PART NUMBERSBC 57-85 Champ Pans Wet Sump Aluminum Oil Pan 6 1/2 Deep PRO1106KO$798.88Fits SB Chevy 1957-1985, 6 1/2” deep x 11 3/4” wide x 13 1/4” long, Asphalt circle track, 8 quarts with filter, right side kick out that starts at the pan rail and runs the full length of the pan, three access holes for the right side pan rail, four trapdoors, louvered windage tray, inspection hole, oil check level plug, no pan gasket required, for use with mini-starter, 1703SB is for the M155 or M10554 pumps in this oil pan Learn More
-
CHP-PRO7206KO-9 PART NUMBERSBF 351 Champ Pans Wet Sump Aluminum Oil Pan 6 1/2 Deep PRO7206KO-9$869.28Fits SB Ford 351 for external pump, 6 1/2" deep, 13" Wide x 13 1/4" Long, Circle track, 7 quarts with filter, no pan gasket required, kick out that starts at the pan rail on the right side, external pickup welded inside, -12 an fitting exiting the top right side of the kick out, front sump removed , billet aluminum front and rear end caps, access plugs for the right side pan rail , full length louvered windage tray, five trapdoors, oil check level plug, for use with reverse mounted starter Learn More
-
CHP-PRO6206KO-9 PART NUMBERSBF 302 Champ Pans Wet Sump Aluminum Oil Pan 6 1/2 Deep PRO6206KO-9$869.28Fits SB Ford 302 for external pump, 6 1/2" deep, 13" Wide x 13 1/4" Long, Circle track, 7 quarts with filter, no pan gasket required, kick out that starts at the pan rail on the right side, external pickup welded inside, -12 an fitting exiting the top right side of the kick out, front sump removed , billet aluminum front and rear end caps, access plugs for the right side pan rail , full length louvered windage tray, five trapdoors, oil check level plug Learn More
Home page
YOUR SOURCE FOR
Custom & High Performance Engine Parts
Complete Engine Short Block Rot...