Image is a representation of this item. Actual item may vary.
Part Number:
ARP-201-6302

ARP BMW M62/ M62TU Pro Series Rod Bolt Kit 201-6302

BMW 4.4L (M62/ M62TU) V8 M9 x 53mm UHL, Complete

Special Price $210.40 Regular Price $229.95
View Similar Items
⚠ PROP 65 WARNING
⚠ WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer. Please contact us to obtain a list of harmful chemicals. For more information, go to www.P65Warnings.ca.gov.
Unquestionably the most important fasteners in any engine are the connecting rod bolts, as they hold the key to the entire rotating assembly. A broken bolt will lead to catastrophic engine failure. As you can imagine, the most critical joint is where the connecting rod halves mate. The rod bolts must support the primary tension loads caused by each rotation (or cycle) of the crankshaft. When the crank rotates, the big end of the connecting rod essentially becomes oval-shaped and the rod bolts bend. As the crankshaft continues to rotate, the rod becomes round again. With alternating tension loads and cyclic bending of the bolts, it is very important to install fasteners that are able to exert a clamping force greater than the load imposed upon the joint (tension).

In addition to utilizing a rod bolt with sufficient strength to withstand the tremendous cyclical strains placed upon it, it is absolutely imperative that the bolts be properly tightened. The preferred method of monitoring the correct amount of tension is through use of a stretch gauge. This is far more accurate than using a torque wrench. Moreover, through subsequently checking the rod bolts length at teardowns, it is possible to determine if it has been stressed beyond safe limits and must be replaced.

For the most severe applications, in conjunction with aftermarket I-beam rods, ARP has developed the "Pro" Series bolts. These ultra heavy-duty rod bolts are made from a special material designed ARP2000. It has approximately 200% the fatigue life of 8740 chrome moly steel and has a tensile strength of 220,000 psi, and is capable of more than 12,000 lbs clamping force.
More Information
CNC Part Number ARP-201-6302
Price $229.95
Manufacturer's Part Number 201-6302
Brands ARP
Part Types Bolt, Connecting Rod Bolt, Connecting Rod Bolt Kit, Fastener, Hardware
Departments Parts, Hardware
Vehicle Make BMW
Fastener Material ARP 2000
Fastener Style Bolt
Fastener Finish Black Oxide
Custom Notices ⚠ PROP 65 WARNING
Other Customers Also Bought
PART #: UEM-IC581C-040 Icon Pistons IC867-040 Fits Ford FE 428 Dish 16.3cc Bore 4.170
Icon Pistons IC581C-040 Fits Ford FE 428 Dish 16.3cc Bore 4.170
Special Price $765.94 Regular Price $789.63
PART #: UEM-IC709-060 Icon Pistons IC709-060 Fits Ford Windsor 347 Flat Top 4.8cc Bore 4.060
Icon Pistons IC709-060 Fits Ford Windsor 347 Flat Top 4.8cc Bore 4.060
Special Price $707.29 Regular Price $729.16
PART #: FRG-220104 220104 Fragola  -4AN Straight Pro Flow Hose End
220104 Fragola -4AN Straight Pro Flow Hose End
$6.40
PART #: MEL-M155 Melling Oil Pump M155, SB Chevy, Standard Volume, 3/4 Inlet
Melling Oil Pump M155, SB Chevy, Standard Volume, 3/4 Inlet
$48.95
PART #: AED-5896 AED-5896
AED 5896 Trick Jet extensions with machined float
$38.60
PART #: SCA-46019 Scat 408 6.0L LS2 Rotating Assembly Kit, LS2K Diamond Pistons -15cc Dish
Scat 408 6.0L LS2 Rotating Assembly Kit, LS2K Diamond Pistons -15cc Dish
Special Price $3,368.95 Regular Price $3,443.95