Image is a representation of this item. Actual item may vary.
Part Number:
ARP-244-6401

ARP Chrysler Wedge & Magnum Pro Wave Rod Bolt Kit 244-6401

Chrysler 318-340-360 Wedge & 318-360 Magnum, Complete

Special Price $130.80 Regular Price $142.95
View Similar Items
⚠ PROP 65 WARNING
⚠ WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer. Please contact us to obtain a list of harmful chemicals. For more information, go to www.P65Warnings.ca.gov.
Unquestionably the most important fasteners in any engine are the connecting rod bolts, as they hold the key to the entire rotating assembly. A broken bolt will lead to catastrophic engine failure. As you can imagine, the most critical joint is where the connecting rod halves mate. The rod bolts must support the primary tension loads caused by each rotation (or cycle) of the crankshaft. When the crank rotates, the big end of the connecting rod essentially becomes oval-shaped and the rod bolts bend. As the crankshaft continues to rotate, the rod becomes round again. With alternating tension loads and cyclic bending of the bolts, it is very important to install fasteners that are able to exert a clamping force greater than the load imposed upon the joint (tension).

In addition to utilizing a rod bolt with sufficient strength to withstand the tremendous cyclical strains placed upon it, it is absolutely imperative that the bolts be properly tightened. The preferred method of monitoring the correct amount of tension is through use of a stretch gauge. This is far more accurate than using a torque wrench. Moreover, through subsequently checking the rod bolts length at teardowns, it is possible to determine if it has been stressed beyond safe limits and must be replaced.

For the most severe applications, in conjunction with aftermarket I-beam rods, ARP has developed the "Pro" Series Wave-Loc bolts. These ultra heavy-duty rod bolts are made from a special material designed ARP2000. It has approximately 200% the fatigue life of 8740 chrome moly steel and has a tensile strength of 220,000 psi, and is capable of more than 12,000 lbs clamping force.
More Information
CNC Part Number ARP-244-6401
Price $142.95
Manufacturer's Part Number 244-6401
Brands ARP
Part Types Bolt, Connecting Rod Bolt, Connecting Rod Bolt Kit, Fastener, Hardware
Departments Parts, Hardware
Vehicle Make Chrysler
Fastener Material ARP 2000
Fastener Style Bolt
Fastener Finish Black Oxide
Custom Notices ⚠ PROP 65 WARNING
Other Customers Also Bought
PART #: BRO-BR60064D F6100
Brodix BR 60064D Stainless Exhaust Valve 1.600
$41.95
PART #: Ram-88760HDX Ram HDX Clutch Set GM 10.5' X 1 1/8 X 10 Spline
Ram HDX Clutch Set GM 10.5' X 1 1/8 X 10 Spline
$299.00
PART #: ARP-534-9704 ARP-534-9704
ARP Chevy Engine Fastener & Accessory Kit 534-9704
Special Price $138.12 Regular Price $150.95
PART #: PAC-KS04 PAC RPM Series Beehive Valve Spring Kit PAC-KS04
PAC RPM Series Beehive Valve Spring Kit PAC-KS04
$164.54
PART #: CCA-738-16 Comp Cams 738-16 Titanium 10 Degree Valve Spring Retainers
Comp Cams 738-16 Titanium 10 Degree Valve Spring Retainers
$428.95
PART #: JE-317758 JE Pistons 317758 Forged Acura K20A/ Z Dish 90.0mm Bore
JE Pistons 317758 Forged Acura K20A/ Z Dish 90.0mm Bore
Special Price $809.99 Regular Price $899.99
PART #: RTT-1001858 Race Tec Pistons 1001355 Forged 20° ASCS/ SPEC 360 Dome 4.060 Bore, SB Ford 363
Race Tec Pistons 1001858 Chevy LT4 Gen V 4.065 Bore
$1,097.00