Image is a representation of this item. Actual item may vary.
Part Number:
ARP-208-6005

ARP Honda/Acura NSX Pro Series Rod Bolt Kit 208-6005

Honda/Acura 3.2L (C32B) V6 Acura NSX M8, Complete

Special Price $164.65 Regular Price $179.95
View Similar Items
⚠ PROP 65 WARNING
⚠ WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer. Please contact us to obtain a list of harmful chemicals. For more information, go to www.P65Warnings.ca.gov.
Unquestionably the most important fasteners in any engine are the connecting rod bolts, as they hold the key to the entire rotating assembly. A broken bolt will lead to catastrophic engine failure. As you can imagine, the most critical joint is where the connecting rod halves mate. The rod bolts must support the primary tension loads caused by each rotation (or cycle) of the crankshaft. When the crank rotates, the big end of the connecting rod essentially becomes oval-shaped and the rod bolts bend. As the crankshaft continues to rotate, the rod becomes round again. With alternating tension loads and cyclic bending of the bolts, it is very important to install fasteners that are able to exert a clamping force greater than the load imposed upon the joint (tension).

In addition to utilizing a rod bolt with sufficient strength to withstand the tremendous cyclical strains placed upon it, it is absolutely imperative that the bolts be properly tightened. The preferred method of monitoring the correct amount of tension is through use of a stretch gauge. This is far more accurate than using a torque wrench. Moreover, through subsequently checking the rod bolts length at teardowns, it is possible to determine if it has been stressed beyond safe limits and must be replaced.

For the most severe applications, in conjunction with aftermarket I-beam rods, ARP has developed the "Pro" Series bolts. These ultra heavy-duty rod bolts are made from a special material designed ARP2000. It has approximately 200% the fatigue life of 8740 chrome moly steel and has a tensile strength of 220,000 psi, and is capable of more than 12,000 lbs clamping force.
More Information
CNC Part Number ARP-208-6005
Price $179.95
Manufacturer's Part Number 208-6005
Brands ARP
Part Types Bolt, Connecting Rod Bolt, Connecting Rod Bolt Kit, Fastener, Hardware
Departments Parts, Hardware
Vehicle Make Acura, Honda
Fastener Material ARP 2000
Fastener Style Bolt
Fastener Finish Black Oxide
Custom Notices ⚠ PROP 65 WARNING
Other Customers Also Bought
PART #: DRP-31640 31640 Diamond Pistons SB Ford 302 351C Flat Top 4.030 Bore
31640 Diamond Pistons SB Ford 302 351C Flat Top 4.030 Bore
$1,159.60
PART #: WIS-RED0084X85 RED0084X85 Wiseco Pistons Red Series Dish 4.085 Bore - Chevy LS
RED0084X85 Wiseco Pistons Red Series Dish 4.085 Bore - Chevy LS
$949.99
PART #: FRG-492403BL 492403BL Fragola -3AN, 3/8"-24 Thread Size, BULKHEAD NUT Black
492403BL Fragola -3AN, 3/8"-24 Thread Size, BULKHEAD NUT Black
$1.06
PART #: PWR-9172 9172 POWERMASTER PMGR UPGRADE/NATURAL STARTER - FORD
9172 POWERMASTER PMGR UPGRADE/NATURAL STARTER - FORD
$153.95
PART #: JE-302262 JE Pistons 302262 Forged Audi/ VW 2.0L 8V Dish 83.0mm Bore
JE Pistons 302262 Forged Audi/ VW 2.0L 8V Dish 83.0mm Bore
Special Price $809.99 Regular Price $899.99
PART #: ARP-154-6002 ARP-154-6002
ARP Ford Small Block 289-302 High Performance Rod Bolt Kit 154-6002
Special Price $66.75 Regular Price $72.95