Search results for: 'engine components rotating assemblies'
Shop By
-
CHP-JR130 PART NUMBER
BBC Champ Pans Dipstick JR130 Dipstick$29.90
Dipstick for BBC pan. CP207, CP208, CP208LT, CP209, CP210LT, CP211, PRO2208, PRO2308 and PRO2408 Learn MoreSPECIAL ORDERThis product is only available as a special order and is non-returnable.DROP SHIPThis product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier. -
CHP-JR131 PART NUMBER
SBC Champ Pans Dipstick JR131$29.90
Dipstick assembly for the SB Chevrolet, SB Chrysler and SB Ford oil pans. Learn MoreSPECIAL ORDERThis product is only available as a special order and is non-returnable.DROP SHIPThis product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier. -
CHP-PRO1003 PART NUMBER
SBC 57-85 Champ Pans Dry Sump Aluminum Oil Pan 5 3/4 Deep PRO1003$843.37
Fits SB Chevy 1957-1985, 5.75” deep, double kick out that is 45% larger by volume than our PRO170 pan, extra kick out on the left side that frees up 15-20 horsepower, three -10 o-ring ports that exit the top right side of the pan, mounting plates, for use with reverse mounted starter, requires the removal of block material on the block and changing the mounting holes on the left side of the block Learn MoreSPECIAL ORDERThis product is only available as a special order and is non-returnable.DROP SHIPThis product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier. -
CHP-PRO1010 PART NUMBER
SBC 57-85 Champ Pans Dry Sump Aluminum Oil Pan 5 3/4 Deep PRO1010$829.16
Fits SB Chevy 1957-1985, 5.75” deep, double kick out that is 45% larger by volume than our PRO170 pan, extra kick out on the left side that frees up 15-20 horsepower, two -10 o-ring ports that exit the front right side of the pan, mounting plates, for use with reverse mounted starter, requires the removal of block material on the block and changing the mounting holes on the left side of the block Learn MoreSPECIAL ORDERThis product is only available as a special order and is non-returnable.DROP SHIPThis product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier. -
CHP-PRO1013 PART NUMBER
SBC 57-85 Champ Pans Dry Sump Aluminum Oil Pan 5 3/4 Deep PRO1013$843.37
Fits SB Chevy 1957-1985, 5.75” deep, Sprint cars, double kick out that is 45% larger by volume than our PRO170 pan, extra kick out on the left side that frees up 15-20 horsepower, three -12 o-ring ports that exit the front right side of the pan, mounting plates, for use with reverse mounted starter, requires the removal of block material on the block and changing the mounting holes on the left side of the block Learn MoreSPECIAL ORDERThis product is only available as a special order and is non-returnable.DROP SHIPThis product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier. -
CHP-PRO170R3A PART NUMBER
SBC 57-85 Champ Pans Dry Sump Aluminum Oil Pan 5 1/2 Deep PRO170R3A$807.68
Fits SB Chevy 1957-1985, Lefthander or Port City Chassis, 5 1/2” deep right side, 3 7/8" deep front, Asphalt circle track, no pan gasket required, kick out pouch that starts at the pan rail and goes to the bottom of the pan, 0.100” aluminum, access holes for mounting, three -12 o-ring ports that exit the top right side of the pan, inspection hole, windage screen, drain plug, will clear a mechanical fuel pump, for use with reverse mounted starter Learn MoreSPECIAL ORDERThis product is only available as a special order and is non-returnable.DROP SHIPThis product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier. -
CHP-PRO173R3 PART NUMBER
SBC 86+ Champ Pans Dry Sump Aluminum Oil Pan 6 Deep PRO173R3$807.68
Fits SB Chevy 1986-Up, One piece rear main seal, 6" deep on right; 4 1/2" deep on left, Dirt circle track, No pan gasket required, will clear a mechanical fuel pump, kick out pouch that starts at the pan rail and goes to the bottom of the pan, 0.100” aluminum, access holes for mounting, three -12 o-ring ports that exit the top right side of the pan, inspection hole, drain plug, for use with reverse mounted starter Learn MoreSPECIAL ORDERThis product is only available as a special order and is non-returnable.DROP SHIPThis product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier. -
CHP-PRO173R3A PART NUMBER
SBC 86+ Champ Pans Dry Sump Aluminum Oil Pan PRO173R3A$821.90
Fits SB Chevy 1986-Up, 1pc Rear Main Seal, 6” Deep Right Side, 5" Deep Left Side, Asphalt circle track, no pan gasket required, will clear a mechanical fuel pump, kick out pouch that starts at the pan rail and goes to the bottom of the pan, 0.100” aluminum, access holes for mounting, three -12 o-ring ports that exit the top right side of the pan, inspection hole, drain plug, for use with reverse mounted starter Learn MoreSPECIAL ORDERThis product is only available as a special order and is non-returnable.DROP SHIPThis product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier. -
CHP-PRO171L3OR PART NUMBER
SBC 57-85 Champ Pans Dry Sump Aluminum Oil Pan 5 3/4 Deep PRO171L3OR$918.70
Fits SB Chevy 1957-1985, 5 3/4" deep on right; 4 1/4" deep on left, Off-road trucks, no pan gasket required, kick out pouch that starts at the pan rail and goes to the bottom of the pan, 0.100” aluminum , access holes for mounting, three -10 o-ring ports that exit the bottom left side of the pan, inspection hole, drain plug, notched for a front mini-starter Learn MoreSPECIAL ORDERThis product is only available as a special order and is non-returnable.DROP SHIPThis product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier. -
CHP-PRO171R3OR PART NUMBER
SBC 57-85 Champ Pans Dry Sump Aluminum Oil Pan 5 3/4 Deep PRO171R3OR$918.70
Fits SB Chevy 1957-1985, 5 3/4" deep on right; 4 1/4" deep on left, Off-road trucks, no pan gasket required, kick out pouch that starts at the pan rail and goes to the bottom of the pan, 0.100” aluminum, access holes for mounting, three -10 o-ring ports that exit the bottom right side of the pan, inspection hole, drain plug, notched for a front mini-starter Learn MoreSPECIAL ORDERThis product is only available as a special order and is non-returnable.DROP SHIPThis product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier.
Engine Parts > Rotating Assembly - Stroker Kits > BBC 454 Rotating Assembly
CNC-Motorsports offers an endless variety of Big Block Chevy 454 rotating assemblies. We offer ever...
Engine Parts > Rotating Assembly - Stroker Kits > BBC 502 509 Rotating Assembly
CNC-Motorsports offers an endless variety of Big Block Chevy 502 rotating assembly kits. We offer e...
Engine Parts > Rotating Assembly - Stroker Kits > BBC 504 511 Rotating Assembly
CNC-Motorsports offers an endless variety of Big Block Chevy 504-511 rotating assembly. We offer ev...
Terms & Conditions
Shipping & Delivery
All items are shipped through UPS Ground, FedEx or USPS, unless special...
Home page
YOUR SOURCE FOR
Custom & High Performance Engine Parts
Complete Engine Short Block Rot...