Comp Cams 96836B-16 Sportsman Bushed Mechanical Roller Lifters, Ford FE & BB Ford

Sportsman Lifters from COMP Cams® are designed to be a premium and lighter weight upgrade over Endure-X™ Lifters. Sportsman Lifters are offered in two configurations: a standard/traditional needle bearing axle/wheel design or an optional bronze bushing axle/wheel setup. And for Chevrolets, there are also left or right offset pushrod seat options. Each design features two pressurized EDM oil feeds to the axle, along with an edge orifice feed to the wheel. This design delivers a more reliable oil feed than most other options on the market. Sportsman™ Lifters also feature a shallower oil band than competitor’s versions for increased strength and rigidity, while internal machining helps to reduce weight.

The body design utilizes a skirted wheel that strengthens the lifter ears and also provides more contact area with the lifter bore for further lifter stability. In addition, staked axles eliminate clips and provide robust axle retention. This permanent axle retention feature increases the stiffness of the lifter ears and helps prevent the ears from spreading. Sportsman Lifters are built from 8620 premium steel for increased strength and wear resistance and feature a captured link bar design. They utilize a tapered and slotted link bar tower for reduced weight and improved aesthetics. The lifters also feature a tall body to enable use in both standard and .300" tall lifter bores – the result is increased strength and less lifter bore wear.

Features

Traditional Needle Bearing

Optional Bronze Bushing

Pressurized Oil Feed To Roller Wheel & Axle

Pressurized Oil Feed To Pushrod

Shallow Oil Band For Increased Strength & Rigidity

EDM Pressure-Fed Oiling To Roller Wheel & Axle (Both Sides Of Lifter)

Internal Machining To Reduce Overall Lifter Weight

8620 Premium Steel Body For Increased Strength & Wear Resistance

Captured Link Bar For Maximum Control & Durability

Tapered & Slotted Link Bar Tower For Overall Reduced Lifter Weight

Tall Body Enables Use In Standard And .300" Tall Lifter Bores For Reduced Lifter Bore Wear