Image is a representation of this item. Actual item may vary.
Part Number:
CS-4002

Compstar Chevy LS 3.900 Stroke Crank and H Beam Connecting Rods

Chevy LS, Compstar 3.900" Stroke 8 Counterweight Crankshaft, Compstar 6.125 H Beam Rods

$2,263.95
View Similar Items
⚠ PROP 65 WARNING
⚠ WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer. Please contact us to obtain a list of harmful chemicals. For more information, go to www.P65Warnings.ca.gov.
Compstar has developed the widest range of LS crankshafts available anywhere. Regardless if your application is road race, marine, circle track, or street/strip, Compstar has the configuration you need. Made from 4340 steel that is deep nitrided for strength and wear ability, every Compstar crank is intended for high output installation. Compstar LSX crankshafts are counterweighted for enhanced bearing load distribution, which allows these shafts to withstand both high boost and high RPM applications. Machined with large journal radii, gun drilled with 8 mains, and fully lightened rod journals, the Compstar LSX crankshaft is truly built for performance.

  • Stroke: 3.900
  • Main Journal Diameter: 2.559
  • Rod Journal Diameter: 2.100
  • Internal Balance
  • Part Number: APC31Q-CS

    Compstar H Beam connecting rods were designed with higher horsepower stroker motors in mind from the start, not as an afterthought. Bolt upgrades and stroker clearance are normally additional cost options with other rods, but are standard equipment with Compstar rods. ARP 2000 7/16 bolts are used exclusively for superior tensile strength and clamping force at the critical mating joint of the rod and cap. The placement of these bolts is also key to additional rotational clearance in stroker applications at the bottom of the bores and at the pan rails. Strengthening gussets are also added to the bolt spot-face area of the cap where cross sectional thickness is at a minimum. These gussets not only increase strength, but aid in dimensional stability as well. Contouring above the bolts increase cam clearance and decrease the amount of clearance required at the bottom of the bores on the cam side. Compstar rods will clear a .660? lift cam on a .900? base circle with a 4.000? stroke crank without any modification to the rod.

  • Rod Length: 6.125
  • Big End: 2.100
  • Small End: .927
  • Part Number: CSC6125DS2A2AH
  • More Information
    CNC Part Number CS-4002
    Price $2,263.95
    Vehicle Make Chevy LS
    Manufacturer's Part Number CS-4002
    Brands Callies
    Part Types Crankshaft & Rod Kit
    Departments Parts
    Crankshaft Stroke 3.900
    Rod Length 6.125
    Custom Notices ⚠ PROP 65 WARNING
    Other Customers Also Bought
    PART #: AFR-1492 AFR Heads 1492
    AFR Heads, 1492 SBF AFR 185 Heads, Pedestal Mount, Emission Legal, 58cc
    Special Price $2,051.59 Regular Price $2,126.00
    PART #: JES-KSS-098080 KSS-098080 Jesel Sportsman Aluminum Shaft Rockers
    KSS-098080 Jesel Sportsman Aluminum Shaft Rockers
    Special Price $1,696.28 Regular Price $1,795.00
    PART #: MAH-4390MS Mahle Performance Piston Ring Set 4390MS
    Mahle Performance Piston Ring Set 4390MS
    $118.05
    PART #: PIO-839057 839057 Pioneer Main Cap Drill Bushing
    839057 Pioneer Main Cap Drill Bushing
    $7.95
    PART #: AAB-FDS-LT1-701-CP FDS-LT1-701-CP All American Billet Serpentine Kit, Chevy LT, Black, A/C & PS
    FDS-LT1-701-CP All American Billet Serpentine Kit, Chevy LT, Black, A/C & PS
    $2,495.95
    PART #: UEM-KB173-134 Keith Black Pistons KB173-0134 Fits BBC 502 Flat Top 3cc Bore 4.600
    Keith Black Pistons KB173-0134 Fits BBC 502 Flat Top 3cc Bore 4.600
    Special Price $491.70 Regular Price $499.19
    PART #: ESP-CRS570063D Eagle CRS570063D H Beam Connecting Rods 5.700 Chevy 4.3L
    Eagle CRS570063D H Beam Connecting Rods 5.700 Chevy 4.3L
    Special Price $460.15 Regular Price $471.95