Products (251-260 of 916)

per page
Set Descending Direction
  1. CHP-CP100LTRB PART NUMBER
    SBC 86+ Champ Pans Wet Sump Steel Oil Pan 7 Deep CP100LTRB
    SBC 86+ Champ Pans Wet Sump Steel Oil Pan 7 Deep CP100LTRB
    $308.47
    SB Chevy 1986-Up, One piece rear main seal, 7” deep x 14” wide x 12” long, Circle track, 8 quarts with filter, Removable horsepower saving louvered windage tray, Six trapdoors, Three crank scrapers , Two runners, Oil temp fitting, Oil check level plug, Clear zinc finish, Use JR131 dipstick, For use with stock or mini-starter, GM replacement for GM25534354 Learn More
    SPECIAL ORDER
    This product is only available as a special order and is non-returnable.
    DROP SHIP
    This product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier.
  2. CHP-CP100KO PART NUMBER
    SBC 57-85 Champ Pans Wet Sump Steel Oil Pan 7 Deep CP100KO
    SBC 57-85 Champ Pans Wet Sump Steel Oil Pan 7 Deep CP100KO
    $388.30
    SB Chevy 1957-1985, 7” deep x 14” wide x 12” long, Circle track, 8 quarts with filter, Kick out that runs the length of the oil pan, Removable horsepower saving louvered windage tray, Six trapdoors, Three crank scrapers , Two runners, Oil temp fitting, Oil check level plug, Clear zinc finish, Use JR131 dipstick, for use with mini-starter, designed around the Chevrolet Camaro front stub with the engine set back Learn More
    SPECIAL ORDER
    This product is only available as a special order and is non-returnable.
    DROP SHIP
    This product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier.
  3. CHP-CP100KORB PART NUMBER
    SBC 86+ Champ Pans Wet Sump Steel Oil Pan 7 Deep CP100KORB
    SBC 86+ Champ Pans Wet Sump Steel Oil Pan 7 Deep CP100KORB
    $388.30
    Fits SB Chevy 1986-Up, One piece rear main seal, 7” deep x 14” wide x 12” long, Circle track, 8 quarts with filter, Kick out that runs the length of the oil pan, Removable horsepower saving louvered windage tray, Six trapdoors, Three crank scrapers , Two runners, Oil temp fitting, Oil check level plug, Clear zinc finish, Use JR131 dipstick, For use with mini-starter, designed around the Chevrolet Camaro front stub with the engine set back Learn More
    SPECIAL ORDER
    This product is only available as a special order and is non-returnable.
    DROP SHIP
    This product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier.
  4. CHP-CP101KO PART NUMBER
    SBC 57-85 Champ Pans Wet Sump Steel Oil Pan 7 Deep CP101KO
    SBC 57-85 Champ Pans Wet Sump Steel Oil Pan 7 Deep CP101KO
    $460.95
    Fits SB Chevy 1957-1985, 7” deep x 11 3/4” wide x 13” long, Circle track, 9 quarts with filter, Kick out that goes all the way to the block , Three access plugs on the right side for mounting, Five trapdoors, Two runners, Sump tray, Oil temp sender port, 3/4” sight hole, Removable louvered windage tray that covers 160 degrees of the crank rotation, Clear zinc finish, Use JR131 dipstick, for use with mini-starter for a 168 flywheel, designed for race cars that do not have a cross member in the way Learn More
    SPECIAL ORDER
    This product is only available as a special order and is non-returnable.
    DROP SHIP
    This product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier.
  5. CHP-CP101KORB PART NUMBER
    SBC 86+ Champ Pans Wet Sump Steel Oil Pan 7 Deep CP101KORB
    SBC 86+ Champ Pans Wet Sump Steel Oil Pan 7 Deep CP101KORB
    $460.95
    Fits SB Chevy 1986-Up, One piece rear main seal, 7” deep x 11 3/4” wide x 13” long, Circle track, 9 quarts with filter, Kick out that goes all the way to the block , Three access plugs on the right side for mounting, Five trapdoors, Two runners, Sump tray, Oil temp sender port, 3/4” sight hole, Removable louvered windage tray that covers 160 degrees of the crank rotation, Clear zinc finish, Use JR131 dipstick, for use with mini-starter for a 168 flywheel, designed for race cars that do not have a cross member in the way Learn More
    SPECIAL ORDER
    This product is only available as a special order and is non-returnable.
    DROP SHIP
    This product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier.
  6. CHP-CP101LT PART NUMBER
    SBC Champ Pans Wet Sump Steel Oil Pan 7 Deep CP101LT
    SBC Champ Pans Wet Sump Steel Oil Pan 7 Deep CP101LT
    $319.44
    Fits SB Chevy, 7” deep x 11 3/4” wide x 13” long, Circle track, 9 quarts with filter, Five trapdoors, Two runners, Sump tray, Oil temp sender port, 3/4” sight hole, Removable louvered windage tray, Clear zinc finish, Use JR131 dipstick, for use with mini-starter for a 168 or 153 flywheel, designed for race cars that have engine set back Learn More
    SPECIAL ORDER
    This product is only available as a special order and is non-returnable.
    DROP SHIP
    This product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier.
  7. CHP-CP102KO PART NUMBER
    SBC 57-85 Champ Pans Wet Sump Steel Oil Pan 7 Deep CP102KO
    SBC 57-85 Champ Pans Wet Sump Steel Oil Pan 7 Deep CP102KO
    $463.62
    Fits SB Chevy 1957-1985, 7” deep x 11 1/4” wide x 16 1/2” long, Circle track, 11 quarts with filter, Kick out that goes all the way to the block, Three access plugs on the right side for mounting, Six trapdoors, Two runners, Sump tray, Oil temp sender port, 3/4” sight hole, Removable louvered windage tray that covers 160 degrees of the crank rotation, Clear zinc finish, Use JR131 dipstick, For use with Mini-starter for a 168 flywheel, designed for race cars that do not have a cross member in the way Learn More
    SPECIAL ORDER
    This product is only available as a special order and is non-returnable.
    DROP SHIP
    This product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier.
  8. CHP-CP102KORB PART NUMBER
    SBC 86+ Champ Pans Wet Sump Steel Oil Pan 7 Deep CP102KORB
    SBC 86+ Champ Pans Wet Sump Steel Oil Pan 7 Deep CP102KORB
    $463.62
    Fits SB Chevy 1986-Up, One piece rear main seal, 7” deep x 11 1/4” wide x 16 1/2” long, Circle track, 11 quarts with filter, Kick out that goes all the way to the block, Three access plugs on the right side for mounting, Six trapdoors, Two runners, Sump tray, Oil temp sender port, 3/4” sight hole, Removable louvered windage tray that covers 160 degrees of the crank rotation, Clear zinc finish, Use JR131 dipstick, For use with Mini-starter for a 168 flywheel, designed for race cars that do not have a cross member in the way Learn More
    SPECIAL ORDER
    This product is only available as a special order and is non-returnable.
    DROP SHIP
    This product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier.
  9. CHP-CP103KO PART NUMBER
    SBC 57-85 Champ Pans Wet Sump Steel Oil Pan 6 1/2 Deep CP103KO
    SBC 57-85 Champ Pans Wet Sump Steel Oil Pan 6 1/2 Deep CP103KO
    $466.49
    Fits SB Chevy 1957-1985, 6 1/2” deep 11 1/4” wide x 16 1/2” long, Circle Track, 8 1/2 quarts with filter, Kick out that goes all the way to the block , Three access plugs on the right side for mounting, Six trapdoors, Two runners, Sump tray, Oil temp sender port, 3/4” sight hole, Removable louvered windage tray that covers 160 degrees of the crank rotation, Clear zinc finish, Use JR131 dipstick, 1703SB is for the M155 or M10554 pumps in this oil pan, For use with Mini-starter for a 168 flywheel, Designed for race cars that do not have a cross member in the way Learn More
    SPECIAL ORDER
    This product is only available as a special order and is non-returnable.
    DROP SHIP
    This product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier.
  10. CHP-CP103LT PART NUMBER
    SBC 57-85 Champ Pans Wet Sump Steel Oil Pan 6 1/2 Deep CP103LT
    SBC 57-85 Champ Pans Wet Sump Steel Oil Pan 6 1/2 Deep CP103LT
    $370.82
    Fits SB Chevy 1957-1985, 6 1/2” deep 11 1/4” wide x 16 1/2” long, Asphalt circle track, 8 1/2 quarts with filter, Six trapdoors, Two runners, Sump tray, Oil temp sender port, 3/4” sight hole, Removable louvered windage tray, Clear zinc finish, For use with mini-starter 168 or 153 flywheel, designed for race cars that do not have a cross member in the way Learn More
    SPECIAL ORDER
    This product is only available as a special order and is non-returnable.
    DROP SHIP
    This product is a non-stocking item for CNC-Motorsports and will be shipped directly from the manufacturer / supplier.

Products (251-260 of 916)

per page
Set Descending Direction