Icon Pistons IC10014-STD Fits SBC 350 Dome 6cc Bore 4.000

Icon's FHR (Formed Head Relief) pistons deliver quality on a budget. FHR pistons have valve reliefs that are formed into the piston as the forging blank is pressed into the die. Many of the FHR dome pistons feature a solid dome. This gives engine builders the flexibility to machine the dome to their desired compression ratio. FHR pistons are 11% silicon which means they can be installed with tighter piston to wall clearance. In addition, the use of 4032 aluminum decreases the friction created during engine operation, this results in extended piston life and reduced wear

Mini grooves allow an overheated pistons to transfer heat to the wall

Skirts machined by UEM's unique in house built cnc machines

1.5 1.5 3.0mm rings

Die formed relief valves

Accumulator groove to help eliminate flutter and maximize ring seal

Wrist pins and spiral lock rings 5/64 x 5/64 x 3/16

Compression Ratio 58cc 12.8:1, 64cc 11.8:1, 76cc 10.1:1

Advertised piston weight 575 grams, 132 gram wrist pin

OE Deck Height 9.025"

Note: Standard bore size is 4.000

Note: Centered Pin. Will fit Vortec and Brodix-10 cylinder heads. Update includes 1/16th ring pack and round wire lockring
Replaced IC9933