Wissota Late Model SB Chevy 358 Spec Race Engine (3.550 Stroke)

Here at CNC-Motorsports we strive for customer satisfaction on every engine. These motors all start with quality new Dart SHP blocks. The Dart blocks start by going to our Peterson Align hone where every block is machined within specs. From there we go to our Rottler F68A CNC machine, where we true the bell housing face, parallel square deck, bore, and stroker clearance (when required).Once the blocks are completed at the Rottler they go to our Sunnen CK-10 cylinder hone, where the block is finish honed to specification and checked with our profilometer. Each valve job is done on our Berco cylinder head machine and flow tested on our Saenz flow bench. All of our rotating assemblies are balanced on our Hines Dominator custom built balancing machine. Each component is balanced within +/- 1 grams and the crankshaft is spin balanced to within .5 grams. All engines are fully blueprinted to our race specs. 

Dart SHP Block 
Callies Magnum Crankshaft 
Carrillo H Beam Rods 
JE Dome pistons w/ DLC Coated pins
Total Seal AP Steel piston rings 
Clevite 77 rod and main bearings 
Dura-bond cam bearings 
Pioneer SFI balancer 
Fel-Pro performance gaskets 
Cloyes double roller timing set
Custom Solid roller camshaft 
Aluminum timing cover 
Crower roller lifters 

Trend pushrods 
Crower shaft rockers 
ARP head studs 
Brodix Spec cylinder heads 
Ferrea Valves  
Isky Springs 
Crower titanium retainers 
Crower locks 
CNC Motorsports Spring Oiling Valve Covers 
Kevko Dry Sump Oil Pan 

Barnes Oil Filter Adapter
Edelbrock intake 
All ARP bolts 

BLP Carburetor

Wehrs Carburetor Spacer

Fuel Log

MSD Crank Trigger Distributor

MSD Crank Trigger

MSD HVC Coil

MSD Wires

Stewart Stage 2 water pump

Jones Pulleys

Professionally machined and blueprinted in-house by our CNC-Motorsports Staff 

***Price includes engine break in on our in-house DTS engine dyno and enrollment in our Contingency program***