Wissota Street Stock SB Chevy 350 Concept Race Engine

Here at CNC-Motorsports we strive for customer satisfaction on every engine. These motors all start with quality core blocks. The core blocks start by going to our Peterson Align hone where every block is machined within specs. From there we go to our Rottler F68A CNC machine, where we true the bell housing face, parallel square deck, bore, and stroker clearance (when required).Once the blocks are completed at the Rottler they go to our Sunnen CK-10 cylinder hone, where the block is finish honed to specification and checked with our profilometer. Each valve job is done on our Berco cylinder head machine and flow tested on our Saenz flow bench. All of our rotating assemblies are balanced on our Hines Dominator custom built balancing machine. Each component is balanced within +/- 1 grams and the crankshaft is spin balanced to within .5 grams. All engines are fully blueprinted to our race specs. 


Includes the following:

• Core GM Block
• Manley forged Crankshaft
• Eagle SIR I Beam 5.7 rods with ARP bolts
• Mahle forged flat top pistons
• Mahle rings
• performance rod and main bearings
• Dura-bond cam bearings
• Melling oil pump
• Fel-Pro performance gaskets
• SA Gear timing chain with lock plate and cam button
• Custom hydraulic camshaft
• Crower lifters
• Trend pushrods
• Comp Cams nitride rocker arms
• Moroso lifter valley baffles
• EQ CH350I cylinder heads
• Ferrea Valves
• Manley Springs
• Comp Retainers
• Crower Locks
• CNC Circle track valve covers
• Kevko 8 quart circle track oil pan
• Edelbrock intake
• ARP Hardware
• Professionally machined and blueprinted in-house by our CNC-Motorsports Staff
  ***Price includes engine break in on our in-house DTS engine dyno